留言
报告导航:研究报告TMT产业消费电子
2012-2013年全球及中国移动PC外壳行业研究报告
字数:2.6万 页数:98 图表数:81
中文电子版:8000元 中文纸版:4000元 中文(电子+纸)版:8500元
英文电子版:2100美元 英文纸版:2200美元 英文(电子+纸)版:2400美元
编号:ZYW141 发布日期:2013-01 附件:下载
2012年全球及中国移动PC外壳行业研究报告包括以下内容:

    1、全球与中国PC市场
    2、全球与中国移动PC产业
    3、笔记本电脑与平板电脑外壳产业
    4、5家主要笔记本电脑与平板电脑代工厂家研究
    5、18家笔记本电脑与平板电脑外壳产业链厂家研究
       
  2012年笔记本电脑机壳最明显的趋势就是A、B、C、D面开始采用不同的材料。主要原因是苹果Unibody铝合金机壳受到市场热捧,其他厂家为了维持市场占有率,模仿苹果的铝合金机壳。不过Unibody铝合金机壳耗时耗产能,全球Unibody铝合金机壳大厂鸿准和可成的产能被苹果全部占用。

  Ultrabook的出现也是带动笔记本机壳材料变化的重要原因。Ultrabook的A面很薄且具备触控屏功能,因此需要具备高强度(high strength),同时A面最大程度上决定了外观。按A面成本计算,最贵的是碳纤维编织布增强(Carbon Fbier Textile Refinfoce)或镁合金die casting,其次是铝冲压stamping。但是碳纤维外观不够灵活,CFRP的强度则与镁合金相差无几。

  B面通常都与A面一体,采用塑料。

  成本最高的是C面,C面不仅容纳键盘,各种结构件的固定都依赖C面。因此C面要具备最高强度,且其形状复杂,加工费时,其价格高于A面。不计成本的C面设计是苹果的Unibody铝合金CNC,其次是镁合金铸造。

  D面在Ultrabook领域也异常重要,因为Ultrabook超薄,散热问题需要重视。同时Ultrabook全部使用扁平的锂聚合物(LiPolymer)电池,必须保证D面有足够高的强度来保护锂聚合物电池。按D面成本算,最贵的是使用碳纤维编织布增强或镁合金die casting,其次是铝合金冲压,再次是玻璃纤维增强,最差是塑料。

  中高端的笔记本电脑A面会采用铝合金冲压,B面为塑料,C面为镁合金压铸,D面为玻纤增强塑料或铝合金冲压。低端仍然采用全塑料外壳。高端A面会采用CFRP或镁合金压铸。B面塑料,C面为Unibody,D面使用碳纤维编织布增强或镁合金冲压。中端也可能使用全玻纤增强塑料外壳。

  2012年笔记本电脑外壳产业规模增长11.1%,达5620百万美元,预计2013年增长10.9%达到6130百万美元。虽然笔记本电脑产量在下降,但因大量采用金属外壳,使得笔记本电脑外壳市场规模能够保持10%左右的增幅。2012年平板电脑外壳产业规模2096百万美元,比2011年增长49.5%,预计2013年增长33.7%,达到2803百万美元。

  iPad2的机壳成本大约25美元。iPad mini机壳厚度7.2mm,因为机壳变薄,iPad mini所需要的工艺较New iPad复杂,且表面处理更为困难,使得iPad mini加工小时数提高,价格达20美元。

  三星使用类似iPhone的设计,采用玻璃前面板,其余采用塑料设计。Google Nexus 7的机壳是全塑料,主要为降低成本,其成本大约10美元,由广达旗下的展运提供。Amazon 的Kindle第一代采用塑料机壳,第二代采用铝合金冲压背板设计,第一代成本大约10美元,第二代大约14美元。Kindle第一代机壳由展运提供,第二代机壳由巨腾提供。

  鸿准Foxconn Technology、可成(Catcher)、铠胜(CASETEK)包揽了苹果所有产品的外壳订单,业绩稳定增加,成为众人羡慕的对象。塑料外壳大厂巨腾2012年大幅度提高金属外壳业务,收入和获利都有大幅度提升。

The report covers the followings:

    1. Global and Chinese PC markets
    2. Global and China Mobile PC industry
    3. Notebook and tablet PC casing industry
    4. 5 leading notebook and tablet PC OEMs
    5. 18 notebook and tablet PC casing manufacturers

In 2012, it becomes the most conspicuous trend of notebook casing that the surfaces A, B, C and D employ different materials. The main reason lies in the popularity of Apple Unibody aluminum alloy casing; consequently, other peers follow up Apple's aluminum alloy casing so as to maintain their market share. Yet, it takes a long time and considerable capacity to produce Unibody aluminum alloy casing. The capacity of Unibody aluminum alloy casing giants Foxconn and Catcher has been fully occupied by Apple.

The emergence of Ultrabook has also driven the change of materials for notebook casing. Ultrabook’s A-side is very thin and has touch screen function, so it requires high strength; what’s more, A side determines the outer appearance to the maximum extent. In accordance with the cost of A side, the most expensive material comes to carbon fiber textile reinforce or magnesium alloy die casting, followed by aluminum stamping. However, the appearance of carbon fiber is not flexible enough; and the strength of CFRP remains nearly the same as that of magnesium alloy.

B side is usually linked with A side, made of plastic.

The cost of C side is the highest. C side not only accommodates the keyboard, but also supports various structural parts. Therefore, C side should have the highest strength. Due to complex shape and time-consuming processing, C side is more expensive than A side. The cost of Apple's Unibody aluminum alloy CNC ranks first, and magnesium alloy casting ranks second.

D side also plays an exceedingly important role in the Ultrabook field. Being ultra thin, the heat dissipation problem of Ultrabook should be paid attention to. Ultrabook uses flat LiPolymer battery, which requires a sufficiently high strength. In accordance with the cost of D side, the most expensive material is carbon fiber textile reinforce or magnesium alloy die casting, followed by aluminum stamping, then glass fiber reinforce, and the worst is plastic.

For medium and high-end notebooks, A side is made of aluminum alloy stamping, B side plastic, C side magnesium alloy die casting, and D side glass fiber reinforced plastic or aluminum alloy stamping. Low-end ones still adopt plastic casing. High-end ones utilize CFRP or magnesium alloy die casting for A side, plastic for B side, Unibody for C side, and carbon fiber woven cloth reinforce or magnesium alloy stamping for D side. Medium-end ones also probably make use of glass fiber reinforced plastic casing.

The notebook casing industry scale soared by 11.1% to USD5,620 million in 2012, and it is expected to grow by 10.9% to USD6,130 million in 2013. The notebook output is on the decline, but the notebook casing market size still maintains the growth rate of about 10% due to the wide application of metal casing. In 2012, the tablet PC enclosure industry generated USD2,096 million, rising 49.5% from a year earlier; and the value is expected to ascend by 33.7% to USD2,803 million in 2013.

The casing of iPad2 costs about USD25. Because the thickness of iPad mini casing becomes as thin as 7.2mm, the casing process of iPad mini is more complicated than that of New iPad, and the surface treatment of iPad mini is also more difficult. As a result, it takes more time to process iPad mini casing with the unit price as high as USD20.

Samsung employs iPhone-like design, and it applies glass to front panels and plastic to the rest parts. Google Nexus 7 casing is completely made of plastic, which lowers the cost to USD10 or so, and the casing is supplied by Quanta's Zhanyun. Amazon's first generation Kindle is equipped with plastic casing with the cost of USD10, while the second generation one with aluminum alloy stamping backplane with the cost of about USD14. The first generation Kindle casing is provided by Zhanyun, whereas the second generation casing is offered by Ju Teng.

Foxconn Technology, Catcher and CASETEK sweep all casing orders for all Apple’s products, so their performance witnesses steady growth, and they are admired. The plastic casing giant Ju Teng improved the metal casing business substantially in 2012, so that its revenue and profit were raised significantly.
第一章、全球PC市场
1.1、全球PC市场规模
1.2、笔记本电脑市场
1.3、中国笔记本电脑市场
1.4、ULTRABOOK市场
1.5、TABLETPC市场

第二章、移动PC产业
2.1、笔记本电脑产业
2.2、笔记本电脑代工
2.3、平板电脑产业
2.4、中国移动PC产业

第三章、笔记本电脑与平板电脑机壳与内构件产业
3.1、玻璃纤维机壳简介
3.2、金属机壳与内构件
3.3、碳纤维机壳
3.4、各种笔记本电脑机壳材料对比
3.5、笔记本电脑机壳发展趋势
3.6、移动PC机壳产业规模
3.7、移动PC机壳产业排名

第四章、移动PC代工厂家研究
4.1、广达
4.2、仁宝COMPAL
4.3、纬创WISTRON
4.4、英业达INVENTEC
4.5、和硕PEGATRON

第五章、移动PC机壳厂家研究
5.1、巨腾JUTENG
5.2、奂鑫HUAN HSIN
5.3、可成CATCHER
5.4、华孚WAFFER
5.5、圣美SHENGMEI
5.6、展运ZHANYUN
5.7、铠胜
5.8、嘉彰CHIA CHANG
4.9、龙承精密DRAGON TECH PRECISION
5.10、森田
5.11、柏腾
5.12、鸿准FOXCONN TECH
5.13、康准电子科技
5.14、春秋科技
5.15、MOBASE
5.16、INTOPS
5.17、滨川企业
5.18、神基

1 Global PC Market 
1.1 Global PC Market Size 
1.2 Notebook Market 
1.3 Chinese Notebook Market 
1.4 Ultrabook Market 
1.5 Tablet PC Market 

2 Mobile PC Industry
2.1 Notebook Industry
2.2 Notebook ODM
2.3 Tablet PC Industry
2.4 China Mobile PC Industry

3  Notebook and Tablet PC Casing & Internal Components Industry 
3.1 Brief Introduction to Glass Fiber Casing  
3.2 Metal Casing and Internal Components 
3.3 Carbon Fiber Casing
3.4 Contrast between Various Notebook Casing Materials 
3.5 Development Trends of Notebook Casing 
3.6 Mobile PC Casing Industry Scale 
3.7 Ranking in Mobile PC Casing Industry 

4 Mobile PC OEMs
4.1 Quanta 
4.2 Compal 
4.3 Wistron 
4.4 Inventec Inventec
4.5 Pegatron 

5 Mobile PC Casing Manufacturers
5.1 Ju Teng 
5.2 Huan Hsin 
5.3 Catcher 
5.4 Waffer 
5.5 Shengmei 
5.6 Zhanyun 
5.7 Casetek
5.8 Chia Chang 
4.9 Dragon Tech Precision
5.10 Sentien 
5.11 Pttech 
5.12 Foxconn
5.13 Kangzhun Electronic Technology
5.14 Chunqiu Technology
5.15 Mobase
5.16 Intops
5.17 Hamagawa 
5.18 Getac
2007-2013年全球PC出货量
2007-2013年全球DT出货量
2011年3季度-2012年3季度全球前5大PC厂家市场占有率
2007-2013年全球笔记本年电脑出货量
2003-2012年中国笔记本电脑出货量
2009-2012年中国笔记本电脑市场主要厂家市场占有率
2011-2016年ULTRABOOK市场规模
2010-2016年TABLET PC出货量
2011-2013年TABLET PC主要厂家市场占有率
2010-2013年笔记本电脑主要品牌出货量
2006、2008年主要笔记本电脑代工厂家市场占有率
2010年全球笔记本电脑品牌厂家与代工厂家之间配套关系及出货比例
2011年全球笔记本电脑品牌厂家与代工厂家之间配套关系及出货比例
2012、2013年全球笔记本电脑品牌厂家与代工厂家之间配套关系及出货比例
2012、2013年平板电脑主要厂家产量
2004-2012年中国笔记本电脑(包括平板电脑)产量
2010-2012年中国笔记本电脑产量(包括平板电脑)地域分布
2009-2015年笔记本电脑机壳产业规模
2011-2015年笔记本电脑出货量机壳材料分布
2011-2016年平板电脑机壳与内构件产业规模
2011-2012年移动PC机壳主要厂家收入排名
2012年主要笔记本电脑机壳厂家市场占有率
2012年主要平板电脑机壳厂家市场占有率
2001-2012年广达收入与毛利率
2011年1月-2012年12月广达收入与增幅
2004-2012年广达笔记本电脑出货量及增幅
2008-2011年广达收入地域分布
2007-2012年广达产品收入结构
2007-2011年广达收入 客户分布
仁宝全球分布
仁宝2003-2012年收入与毛利率
2011年1月-2012年12月仁宝月度收入与同比增幅
2007-2012年仁宝笔记本电脑出货量与增幅
2007-2012年仁宝收入客户分布
2009-2011年仁宝中国公司产量
纬创2003-2012年收入与毛利率
纬创2004-2012年笔记本电脑出货量与增幅
纬创2005-2012年产品收入结构
2009-2011年纬创中国公司笔记本电脑出货量
英业达集团组织结构图
英业达2003-2012年收入与毛利率
2011年1月-2012年11月英业达月度收入
和硕组织结构
2008-2013年和硕收入与运营利润率
2011-2013年和硕收入产品分布
巨腾2004-2012年收入与EBIT
巨腾2006-2012年收入与毛利率
巨腾公司组织结构
巨腾2009-2012年客户分布
2003-2012年奂鑫收入与税前利润
2009-2012年奂鑫收入产品分布
可成2004-2012年收入与运营利润率
2011年1月-2012年12月可成每月收入
2011-2012年可成收入客户分布
2010-2013年可成收入下游分布
2010-2011年可成大陆子公司财务状况
2003-2012年华孚收入与毛利率
铠胜组织结构
2009-2013年铠胜收入与毛利率
2009-2013年铠胜收入与营业利润率
2009-2012年铠胜收入下游分布
2008-2012年嘉彰收入与运营利润率
2011年1月-2012年12 月嘉彰每月收入
2010年3季度-2011年2季度嘉彰收入下游应用分布
2010年3季度-2011年2季度嘉彰出货量下游应用分布
2010年3季度-2011年2季度嘉彰收入产品分布
2010年3季度-2011年2季度嘉彰出货量产品分布
2007-2012年森田收入与营业利润率
2011年1月-2012年12月森田月度收入
2006-2012年柏腾收入与营业利润率
2011年1月-2012年12月柏腾月度收入
2004-2012年鸿准收入与运营利润率
2011年1月-2012年12月鸿准每月收入
2008-2011年鸿准大陆子公司收入与运营利润
2007-2013年MOBASE收入与运营利润
2004-2013年INTOPS收入与运营利润率
2008-2013年滨川收入与毛利率
2011年1月-2012年12月滨川月度收入
2007-2013年神基收入与毛利率
2011年1月-2012年12月神基月度收入
2011、2012年神基收入业务分布

Global PC Shipment, 2007-2013
Global DT Shipment, 2007-2013
Market Share of Global Top Five PC Vendors, Q3 2011-Q3 2012
Global Shipment of Notebooks, 2007-2013
China’s Shipment of Notebooks, 2003-2012
Market Share of Major Notebook Vendors in China, 2009-2012
Ultrabook Market Size, 2011-2016
Tablet PC Shipment, 2010-2016
Market Share of Major Tablet PC Vendors, 2011-2013
Shipment of Major Notebook Brands, 2010-2013
Market Share of Major Notebook OEMs, 2006 vs 2008
Relationship between Global Notebook Brand Vendors and OEMs and Shipment Ratio, 2010
Relationship between Global Notebook Brand Vendors and OEMs and Shipment Ratio, 2011
Relationship between Global Notebook Brand Vendors and OEMs and Shipment Ratio, 2012-2013
Output of Major Tablet PC Vendors, 2012-2013
China’s Laptop Computer Output (including Tablet PC), 2004-2012
China’s Laptop Computer Output (including Tablet PC) by Region, 2010-2012
Notebook Casing Industry Scale, 2009-2015
Notebook Shipment by Casing Material, 2011-2015
Tablet PC Casing and Internal Components Industry Scale, 2011-2016
Ranking of Major Mobile PC Casing Manufacturers by Revenue, 2011-2012
Market Share of Major Notebook Casing Manufacturers, 2012
Market Share of Major Tablet PC Casing Manufacturers, 2012
Quanta’s Revenue and Gross Margin, 2001-2012
Quanta’s Revenue and Growth Rate, Jan. 2011-Dec. 2012
Quanta’s Notebook Shipment and Growth Rate, 2004-2012
Quanta’s Revenue by Region, 2008-2011
Quanta’s Revenue by Product, 2007-2012
Quanta’s Revenue by Client, 2007-2011
Compal’s Global Presence
Compal’s Revenue and Gross Margin, 2003-2012
Compal’s Monthly Revenue and YoY Growth Rate, Jan. 2011-Dec. 2012
Compal’s Notebook Shipment and Growth Rate, 2007-2012
Compal’s Revenue by Client, 2007-2012
Output of Compal China, 2009-2011
Revenue and Gross Margin of Wistron, 2003-2012
Notebook Shipment and Growth Rate of Wistron, 2004-2012
Revenue Structure of Wistron by Product, 2005-2012
Notebook Shipment of Wistron China, 2009-2011
Inventec’s Organizational Structure
Inventec’s Revenue and Gross Margin, 2003-2012
Inventec’s Monthly Revenue, Jan. 2011-Nov. 2012
Pegatron’s Organizational Structure
Pegatron’s Revenue and Operating Margin, 2008-2013
Pegatron’s Revenue by Product, 2011-2013
Revenue and EBIT of Ju Teng, 2004-2012
Revenue and Gross Margin of Ju Teng, 2006-2012
Organizational Structure of Ju Teng
Client Distribution of Ju Teng, 2009-2012
Revenue and Pre-Tax Profit of Huan Hsin, 2003-2012
Revenue of Huan Hsin by Product, 2009-2012
Catcher’s Revenue and Operating Margin, 2004-2012
Catcher’s Monthly Revenue, Jan. 2011-Dec. 2012
Catcher’s Revenue by Client, 2011-2012
Catcher’s Revenue by Application, 2010-2013
Financial Performance of Catcher’s Subsidiaries in Mainland China, 2010-2011
Waffer’s Revenue and Gross Margin, 2003-2012
Casetek’s Organizational Structure
Casetek’s Revenue and Gross Margin, 2009-2013
Casetek’s Revenue and Operating Margin, 2009-2013
Casetek’s Revenue by Application, 2009-2012
Revenue and Operating Margin of Chia Chang, 2008-2012
Monthly Revenue of Chia Chang, Jan. 2011-Dec. 2012
Revenue of Chia Chang by Application, Q3 2010-Q2 2011
Shipment of Chia Chang by Application, Q3 2010-Q2 2011
Revenue of Chia Chang by Product, Q3 2010-Q2 2011
Shipment of Chia Chang by Product, Q3 2010-Q2 2011
Revenue and Operating Margin of Sentien, 2007-2012
Monthly Revenue of Sentien, Jan. 2011-Dec. 2012
Revenue and Operating Margin of Pttech, 2006-2012
Monthly Revenue of Pttech, Jan. 2011-Dec. 2012
Revenue and Operating Margin of Foxconn, 2004-2012
Monthly Revenue of Foxconn, Jan. 2011-Dec. 2012
Revenue and Operating Profit of Foxconn’s Subsidiaries in Mainland China, 2008-2011
Revenue and Operating Profit of Mobase, 2007-2013
Revenue and Operating Margin of INTOPS, 2004-2013
Revenue and Gross Margin of Hamagawa, 2008-2013
Monthly Revenue of Hamagawa, Jan. 2011-Dec. 2012
Revenue and Gross Margin of Getac, 2007-2013
Monthly Revenue of Getac, Jan. 2011-Dec. 2012
Revenue of Getac by Business, 2011-2012
    如果这份报告不能满足您的要求,我们还可以为您定制报告,请留言说明您的详细需求。

2005-2010 www.pday.com.cn 版权所有
在线客服系统